跳转到主内容

跳到步骤#1

Robert Vandelinder编辑

编辑已通过 由 Ryan Lutz

已删除
已添加
不变

步骤行

[* black] Remove the screw cover located on the bottom of the Zune.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease it out. Do the same on the other side until it's worked free.
[* icon_caution] This is a brittle piece of plastic that will break if forced.
[* red] Once removed, two 2.6 mm screws are exposed. RemoveUsing a small Philips screwdriver, remove the two 2.6mm screws using a small Phillips screwdriverthat should now be exposed.
[* red] Once removed, two 2.6 mm screws are exposed. RemoveUsing a small Philips screwdriver, remove the two 2.6mm screws using a small Phillips screwdriverthat should now be exposed.