跳转到主内容

跳到步骤#1

jmorri04编辑

等待批准

之前
之后
不变

步骤行

[* black] Remove the screw cover located on the bottom of the zune.
[* black] Stick small flat head screw driver in one side of dock screw cover and ease up. Do the same on the other side
-[* black] *Warning: This is a brittle piece of plastic that will break if forced.
-[* black] There should be two screws of size 2.6 mm on the bottom of the Zune.
+[* icon_caution] Warning: This is a brittle piece of plastic that will break if forced.
+[* red] There should be two screws of size 2.6 mm on the bottom of the Zune.