跳转到主内容

跳到步骤#4

Justin Ogihara编辑

编辑已通过 由 Justin Ogihara

之前
之后
不变

步骤行

-[* red] Remove the rubber stoppers at the top left and right (shown in red) with tweezers.
-[* orange] Remove the screws at the top and right (shown in orange) with at PH0 Phillips screwdriver.
+[* red] Remove the rubber stoppers at the top left and right with tweezers.
+[* orange] Remove the screws at the top and right with at Phillips #0 screwdriver.
[* black] These two screws have a diameter of 5.3 mm and a height of 4.3 mm.