跳到步骤＃1
由 Walter Galan — 编辑
编辑已通过 由 Walter Galan
- 之前
- 之后
- 不变
步骤行
| - | [* black] Remove the following three screws: |
|---|---|
| + | [* black] Remove the following three screws securing the bottom left antenna to the rear case: |
| [* red] One 1.2 mm Phillips #00 | |
| [* orange] One 1.1 mm Phillips #00 | |
| [* yellow] One 2.5 mm Phillips #00 |