跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#6

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] In the next few steps you will separate the LCD from the adhesive applied to the upper and lower edges of the LCD relief machined into the front bezel.
[* icon_caution] The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the metalsteel strip on the LCD.
[* icon_caution] The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the metalsteel strip on the LCD.
[* black] Use the flat end of a spudger to gently lift one of the top corners of the LCD out of the front bezel.