跳到步骤#9

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

已删除
已添加
不变

步骤行

[title] Scanner unit disconnection
[* red] Disconnect a wide ribbon cable from the top of the ligic board,logic board.
[* orange] Disconnect
a narrow folded oneribbon from the bottom left hand corner.
[* redyellow] Disengage a connector with 2 red wires on the left hand side of the logic board. Do not simply pull on the wires as they may come out of the plug, but rather pull on the plug with tweezers or your fingernails, rocking it from side to side until it comes undone.
[* red] Disconnect a wide ribbon cable from the top of the ligic board,logic board.
[* orange] Disconnect
a narrow folded oneribbon from the bottom left hand corner.
[* redyellow] Disengage a connector with 2 red wires on the left hand side of the logic board. Do not simply pull on the wires as they may come out of the plug, but rather pull on the plug with tweezers or your fingernails, rocking it from side to side until it comes undone.