跳到步骤＃2
由 Miroslav Djuric — 编辑
- 已删除
- 已添加
- 不变
步骤行
| [* black] Use a pair of tweezers and grasp the black plastic portion of the headphone jack cable. |
| [* black] Slowly pull out the cable. If it's hard to pull, wiggle it slightly side-to-side while pulling it. |
| [* icon_reminder] Plugging the new headphone jack into place will require some force. Make sure not to break the connector while performing this procedure. Grasp the black plastic portion of the cable and wiggle it into the logic board connector. |
图片1
没有之前的图片
已添加