跳转到主内容

跳到步骤#4

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

+[title] Slice through the left adhesive
[* black] Apply heat to the left edge of the iPad for about two minutes, or until it's slightly too hot to touch comfortably.
[* black] If necessary, re-heat your iOpener for a few seconds or until it's a bit too hot to touch. Be careful not to overheat the iOpener, or it may burst.
[* black] Insert a second opening pick at the bottom left corner of the iPad.
[* black] Slide the second opening pick along the left side of the display to separate the adhesive underneath.
[* black] Leave the opening pick inserted near the top left corner of the iPad to prevent the adhesive from re-sealing.