跳转到主内容

跳到步骤#2

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变

步骤行

+[* icon_note] If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and [https://d3nevzfk7ii3be.cloudfront.net/igi/NgVMfmOgJwEalMFF.huge|fold it into a handle|new_window=true].
[* black] Place a suction cup next to the iPad's home button and press down to create a seal.
[* icon_note] To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.
[* black] Firmly pull up on the suction cup to to create a small gap between the front panel and the rear case.
[* icon_caution] Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.
- [* icon_note] If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and [https://d3nevzfk7ii3be.cloudfront.net/igi/NgVMfmOgJwEalMFF.huge|fold it into a handle|new_window=true].
[* black] Once you've opened a sufficient gap, insert an opening pick into the gap.

图片1

旧版本

新版本