跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#2

William Grissom编辑

编辑已通过 由 William Grissom

已删除
已添加
不变

步骤行

[* black] To remove each fitting, secure the outer shell in a vise or such. Use an open-ended wrench or flare wrench (better), to unscrew the mandrel tube from the ID of the hose. It is a normal right-hand thread. Once out, unscrew the hose from inside the shell. That is a left-hand thread, so turn as if you were tightening a bolt to unscrew.
[* black] Factory instructions for the fitting may be document "Gates Field Attachable Coupling Installation" (search), but note the shell there screws onto the hose OD with right-hand thread.

图片1

没有之前的图片

已添加