跳转到主内容

跳到步骤#5

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[* black] Insert an opening pick into the right edge of the phone and slide it upwards towards the top right clip.
- [* icon_note] You do not need to insert the pick more than 2 MM into the edge. If you insert the pick all the way in, you may risk damaging flex cables.
+ [* icon_note] You do not need to insert the pick more than 2 mm into the edge. If you insert the pick all the way in, you may risk damaging flex cables.
[* black] Slowly slide the pick past the clip to disengage it from the frame.
[* icon_note] At this point, the right edge of the midframe should be free from the case. If it isn't, slide an opening clip up and down along the right edge.