跳转到主内容

跳到步骤#6

Ian Zahar编辑

编辑已通过 由 Ian Zahar

之前
之后
不变

步骤行

-[* black] Using the Phillips #0, unscrew 2 3mm screws holding the fan in place and disconnect the cable connecting it to the motherboard. There is an adhesive tab holding the hard drive cable in place up against the fan; remove this as well.
+[* red] Using the Phillips #0, unscrew 2 3mm screws holding the fan in place and disconnect the cable connecting it to the motherboard. There is an adhesive tab holding the hard drive cable in place up against the fan; remove this as well.