跳转到主内容

跳到步骤#1

Marty Rippens编辑

编辑已通过 由 Marty Rippens

之前
之后
不变

步骤行

-[* red] Remove the two 1-64 x 1/2" machine screws and the retaining nuts that fasten the cooling fan to the rear panel using the Philips #0 screwdriver and the 5/32" socket.
+[* red] Remove the two 1-64 x 1/2" machine screws and the retaining nuts that fasten the cooling fan to the rear panel using the Phillips #0 screwdriver and the 5/32" socket.