跳转到主内容

跳到步骤#1

Nick Torres编辑

编辑已通过 由 Nick Torres

之前
之后
不变

步骤行

-[* black] Remove the eight M2.5x8mm Phillips head screws that fasten the bottom cover .
-[* black] Lift bottom cover off and set aside.
-[* black] Remember to place the eight M2.5x8mm Phillips head screws on the magnetic mat so they don’t get lost.
+[* black] Using the Phillips #0 Screwdriver to remove the eight M2.5x8mm Phillips head screws that fasten the bottom cover .
+[* black] Lift bottom cover off using a metal spudger and set it aside.
+[* icon_note] Remember to place the eight M2.5x8mm Phillips head screws on the magnetic mat so they don’t get lost.