跳转到主内容

跳到步骤#2

Sam Johnston编辑

编辑已通过 由 Sam Johnston

之前
之后
不变

步骤行

[* black] Locate the seam between the back case and the end cover on the top edge of the phone.
-[* black] Use the prying tool to detach the two clips by wedging the tool into the right side of the seam and moving right to left. Once the cover comes off set it aside
+[* black] Use the plastic opening tool to detach the two clips by wedging the tool into the right side of the seam and moving right to left. Once the cover comes off set it aside