跳到步骤＃8
由 Lennert Dixson — 编辑
编辑已通过 由 Lennert Dixson
- 之前
- 之后
- 不变
步骤行
| [* black] Using the plastic spudger lift the top part of the keyboard. Then using your hands gently lift the keyboard up. | |
| [* icon_note] Top of the keyboard is where the clips were holding the keyboard in place of the laptop. | |
| [* icon_caution] There are flat ribbon cables that connect the keyboard, avoid breaking these cables by doing each action gently. | |
| - | [* red] Using your hands gently remove the "narrow flat ribbon cable" from the motherboard port. |
| + | [* red] Using your hands gently remove the "narrow flat ribbon cable" from the motherboard port by gently pulling the cable. |