修复你的物品 社区 商店

跳到步骤＃6

由 Miranda Miller — 编辑

编辑已通过 由 Miranda Miller

之前
之后
不变

步骤行

-[* black] Remove the three black 6mm screws that anchor the hard drive using the screwdriver with PH1 bit.
-[* red] This one screw hole will be empty because the 15mm silver screw that holds the plastic cover will anchor the hard drive down.
+[* black] Remove the three black PH1 6mm screws that anchor the hard drive.
+[* icon_note] One screw hole will be empty because the 15mm silver screw that holds the plastic cover will anchor the hard drive down.