跳到步骤＃4
由 Justin Ogihara — 编辑
编辑已通过 由 Justin Ogihara
- 之前
- 之后
- 不变
步骤行
| - | [* red] Remove the two |
|---|---|
| + | [* red] Remove the two 2x3mm screws from the fan using the Phillips #1 screwdriver. |
| [* orange] Disconnect the unit from the motherboard. | |
| [* icon_note] It may be easier to disconnect with the spudger tool but it can also be done by hand. |