跳转到主内容

跳到步骤#2

Kristen Gismondi编辑

编辑已通过 由 Kristen Gismondi

已删除
已添加
不变

步骤行

[* red] Using the same screwdriver and PH1 bit, unscrewUnscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.
[* red] Using the same screwdriver and PH1 bit, unscrewUnscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.
[* black] Remove the circuit board from the joystick housing.