菜单

你的设置

跳到步骤＃2

由 Faith Julian — 编辑

编辑已通过 由 Faith Julian

已删除
已添加
不变

步骤行

[* red] Using the screwdriversame screwdriver and P1 bit, remove the single 0.8 mm screw holding the circuit board in place.
[* red] Using the screwdriversame screwdriver and P1 bit, remove the single 0.8 mm screw holding the circuit board in place.
[* black] Remove the circuit board from the joystick housing.