跳转到主内容

跳到步骤#6

Louis Squitieri编辑

编辑已通过 由 Louis Squitieri

已删除
已添加
不变

步骤行

[* black] Insert wisdom hereRemove the eight 11mm screws from the central pillar using a Phillips #1 screwdriver.
[* black] Pull apart the two sides of the central pillar at the top. They will not separate completely at the bottom.
[* black] With the two halves partially separated, remove the rubber wheel.
[* icon_caution] A small black rectangular piece may fall out of the chute when the halves are separated. Reattach this by reaching into the chute and putting the pins from the piece into the holes on the side of the chute
.
[* black] Insert wisdom hereRemove the eight 11mm screws from the central pillar using a Phillips #1 screwdriver.
[* black] Pull apart the two sides of the central pillar at the top. They will not separate completely at the bottom.
[* black] With the two halves partially separated, remove the rubber wheel.
[* icon_caution] A small black rectangular piece may fall out of the chute when the halves are separated. Reattach this by reaching into the chute and putting the pins from the piece into the holes on the side of the chute
.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

旧版本

新版本