跳转到主内容

跳到步骤#1

Christina Fong编辑

编辑已通过 由 Christina Fong

已删除
已添加
不变

步骤行

[* red] Remove the three 10 mm Phillips #1 screws that connectconnecting the balance sensor to the hoverboard.
[* red] Remove the three 10 mm Phillips #1 screws that connectconnecting the balance sensor to the hoverboard.
[* icon_caution] The balance sensor tabs are made of sensitive rubber. Screw them back on slowly and do not over-tighten.