修复你的物品 社区 商店

跳到步骤＃1

由 Alec M — 编辑

编辑已通过 由 Alec M

之前
之后
不变

步骤行

[title] Disconnect all the labeled cables
-[* blue] Disconnect all the labeled connectors by opening their latches.
+[* blue] Disconnect all the indicated connectors by opening their latches.
[* orange] Remove the flex cable that connects the logic board to the secondary control board.
-[* green] Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running to the connector.
-[* yellow] Disconnect the two hidden connectors under the top connector labeled in pink.
+[* green] Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.
+[* yellow] Disconnect the two hidden connectors under the top connector indicated in pink.
[* light_blue] Disconnect the third hidden connector.