跳转到主内容

跳到步骤#1

Alec M编辑

编辑已通过 由 Alec M

之前
之后
不变

步骤行

-[title] Disconnect all the darned cables
-[* blue] Disconnect all the labeled connectors by flipping up their dark parts.
+[title] Disconnect all the labeled cables
+[* blue] Disconnect all the labeled connectors by opening their latches.
[* orange] Remove the flex cable that connects the logic board to the secondary control board.
[* green] Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running to the connector.
-[* yellow] Disconnect the two hidden connectors under the top connector labeled in pink
-[* light_blue] Disconnect the third hidden connector
+[* yellow] Disconnect the two hidden connectors under the top connector labeled in pink.
+[* light_blue] Disconnect the third hidden connector.