跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#13

Terrance编辑

编辑已通过 由 Terrance

之前
之后
不变

步骤行

[title] Discharge flash reservoir capacitor
[* icon_caution] Dangerous DC Voltage > 200V200V, stored in a 330V 80uF capacitor set.
[* red] Flash xenon tube terminals, positive connected to capacitor, negative controlled by circuit, and a trigger signal.
[* yellow]
Use 10kohm, >2W resistor, connect Brown and Blue point2 solder joints for more than 10sec.5sec. These are flash condenser/capacitor terminals. DO NOT discharge by SHORT them. (Note 2020-10-13)
[* icon_note] DMM's Low-Z voltage works even betterbetter, also safer.
[* icon_caution] Measure voltage between 3 points2 solder joints to ensure voltage <10V
[* icon_caution] Dangerous DC Voltage > 200V200V, stored in a 330V 80uF capacitor set.
[* red] Flash xenon tube terminals, positive connected to capacitor, negative controlled by circuit, and a trigger signal.
[* yellow]
Use 10kohm, >2W resistor, connect Brown and Blue point2 solder joints for more than 10sec.5sec. These are flash condenser/capacitor terminals. DO NOT discharge by SHORT them. (Note 2020-10-13)
[* icon_note] DMM's Low-Z voltage works even betterbetter, also safer.
[* icon_caution] Measure voltage between 3 points2 solder joints to ensure voltage <10V

图片1

旧版本

新版本