跳转到主内容

跳到步骤#3

Drew Singleton编辑

编辑已通过 由 Drew Singleton

已删除
已添加
不变

步骤行

[* black] Gently raise the keyboard from the base enough to access the underside.
[* black] Gently pull
and disconnect the two ribbon wires fromwire connecting the keyboard to the motherboard. Pull near the end of the wire where it is plugged in.
[* black] Remove
the base panelkeyboard.
[* black] Gently raise the keyboard from the base enough to access the underside.
[* black] Gently pull
and disconnect the two ribbon wires fromwire connecting the keyboard to the motherboard. Pull near the end of the wire where it is plugged in.
[* black] Remove
the base panelkeyboard.