跳转到主内容

跳到步骤#5

Nicholas Greer编辑

编辑已通过 由 Nicholas Greer

已删除
已添加
不变

步骤行

[* icon_note] The main power board is located directly behind the power button, screwed into the front plate.
[* black] Locate the green rechargeable battery on the back plate. It is press fit into the housing near the bottom of the back half.
[* black] Trace the red and black wires from the battery to the white clip connecting them to the main power board. Pull out the white clip from the socket on the main board. This will sever the electrical connection between the battery and the rest of the lantern.
[* black] Now that the wires are removed, remove battery from housing on the back plate.
[* icon_caution] Do not remove battery by pulling on the red and black wires. If necessary, use a screwdriver as a lever-arm to pry the battery from its housing.