跳转到主内容

跳到步骤#4

Nicholas Greer编辑

编辑已通过 由 Nicholas Greer

已删除
已添加
不变

步骤行

[* black] To disassemble the main body, grip the lantern so that the front half of the body with the power button on it is in your right hand and the back half with the hand crank is in your left.
[* black] Pinch the front half of the body on both sides with your thumb and index finger just below the first extruding rim of the front plate while simultaneously pulling the back half away.
[* icon_caution] Be careful to not pull the halves of the body away from each other too hard because the internal wires connecting internal components may break.
[* icon_reminder] Take note to remove and set aside black screw mounts located in between the halves at the bottom of the lantern.