跳到步骤＃2
由 Marley Miller — 编辑
编辑已通过 由 Marley Miller
- 之前
- 之后
- 不变
步骤行
| [* black] Insert a 3/16" Allen wrench into the screw on one side of the wheel, and hold it securely in place. At the same time, use a second 3/16" Allen wrench to loosen the screw on the other side. | |
| [* black] Remove the screws. The wheel should now be free and fall out. | |
| + | [* icon_caution] WARNING: During reassembly, do not over-tighten the screws. They should be just firm enough to prevent the wheel from shaking. Over-tightening could result in stripped screws. |