跳转到主内容

跳到步骤#5

Jared Stine编辑

编辑已通过 由 Jared Stine

之前
之后
不变

步骤行

[* black] Use wrench and slowly tighten the nut until it is about half a turn from touching the wheel.
-[* icon_note] Be careful not to cross-thread the axle nut. If turns become too difficult, you may need to loosen the bolt to straighten it and then proceed with tightening.
+[* icon_note] Be careful not to cross-thread the axle nut. If turns become too difficult, you may need to unthread the nut to straighten it and then proceed with tightening.