跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#2

Elizabeth Loiler编辑

编辑已通过 由 Elizabeth Loiler

之前
之后
不变

步骤行

[* black] WithPosition the axle nut off you can now slideopening of the wheel on and off. Depending on your set up there could be two small washers, one that goes on the axle before the wheel and one after the wheelat end of axle.
[* black] To remove the bearings andUse axle to pry bearing spacer from the wheel, first slide the wheel so that it is half off the edgeout of the truck axlewheel.
[* black] Then pry theRepeat prying process for bearing that is still on the axle by prying the wheel about the endother side of the axle. The bearingwheel.
[* icon_note] Bearing spacer
should pop out and the bearing spacer that is loose inside will fall out after it.
[* black] Flip the wheel around and pry out the other bearing in the same manner
bearings are removed.
[* black] WithPosition the axle nut off you can now slideopening of the wheel on and off. Depending on your set up there could be two small washers, one that goes on the axle before the wheel and one after the wheelat end of axle.
[* black] To remove the bearings andUse axle to pry bearing spacer from the wheel, first slide the wheel so that it is half off the edgeout of the truck axlewheel.
[* black] Then pry theRepeat prying process for bearing that is still on the axle by prying the wheel about the endother side of the axle. The bearingwheel.
[* icon_note] Bearing spacer
should pop out and the bearing spacer that is loose inside will fall out after it.
[* black] Flip the wheel around and pry out the other bearing in the same manner
bearings are removed.