跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#2

Jared Stine编辑

编辑已通过 由 Jared Stine

之前
之后
不变

步骤行

[* black] With the axelaxle nut off you can now slide the wheel on and off. Depending on your set up there could be two small washerswashers, one that goes on the axelaxle before the wheel and after the wheel.
[* black] To remove the bearings and bearing spacer from the wheel first slide the wheel so that it is half off the edge of the truck axelaxle.
[* black] Then pry the bearing that is still on the axelaxle by rotating the wheel about the end of the axelaxle. The bearing should pop out and the bearing spacer that is loose inside will fall out after it.
[* black] With the axelaxle nut off you can now slide the wheel on and off. Depending on your set up there could be two small washerswashers, one that goes on the axelaxle before the wheel and after the wheel.
[* black] To remove the bearings and bearing spacer from the wheel first slide the wheel so that it is half off the edge of the truck axelaxle.
[* black] Then pry the bearing that is still on the axelaxle by rotating the wheel about the end of the axelaxle. The bearing should pop out and the bearing spacer that is loose inside will fall out after it.
[* black] Flip the wheel around and pry out the other bearing in the same manner.