跳转到主内容

跳到步骤#1

Daniel编辑

编辑已通过 由 Daniel

之前
之后
不变

步骤行

-[* black] To insert bearings, simply center them over the existing opening and firmly press until they are completely inside the wheel and touching the very middle of the wheel. There is one bearing in each side of the wheel.
-[* black] Removal of the bearings consists of carefully prying them out with a screwdriver in a circular pattern.
+[* black] To remove existing wheels and bearings from your trucks follow this process for each wheel. If no wheels are currently on your trucks please proceed to step 2.
+[* black] First remove the axel nut at the center of the wheel with either a skate tool, socket wrench, or monkey wrench that fits the nut.