跳转到主内容

跳到步骤#1

Jared Stine编辑

编辑已通过 由 Jared Stine

之前
之后
不变

步骤行

[* black] To insert bearings, simply center them over the existing opening and firmly press until they are completely inside the wheel and touching the very middle of the wheel. There is one bearing in each side of the wheel.
[* black] Removal of the bearings consists of carefully prying them out with a screwdriver in a circular pattern.
-[* icon_note] If your bearings need to be repaired or maintained, please reference the [Bearings Maintenance] guide.