跳转到主内容

跳到步骤#2

Brennen Fasbender编辑

编辑已通过 由 Marty Rippens

之前
之后
不变

步骤行

-[* green] Using a prying tool, lift up and loosen the metallic silver trim on the perimeter of the phone.
-[* blue] With the prying tool, carefully remove the gray mid-plate.
- [* icon_caution] Take extra caution to not destroy the QWERTY keyboard, which lies directly behind the mid-plate. Also be cautious to not slide open the phone at this time.
-[* black] The mid-plate should be completely removed, so as to have the keyboard completely separated from the device.
- [* black] At this point, you may remove the original QWERTY keyboard and install a replacement keyboard. Installation is the reverse of removal.
+[* red] Using a prying tool, lift up and loosen the metallic silver trim on the perimeter of the phone.
+[* orange] With the prying tool, carefully remove the gray mid-plate.
+ [* icon_caution] Take extra caution to not destroy the QWERTY keyboard, which lies directly behind the mid-plate. Do not slide open the phone at this time.
+[* black] The mid-plate should be completely removed, for the keyboard to be completely separated from the device.
+ [* icon_note] At this point, you may remove the original QWERTY keyboard and install a replacement keyboard. Installation is the reverse of removal.

图片1

旧版本

新版本

图片2

旧版本

新版本