跳到步骤＃1
由 Katie Zombro — 编辑
编辑已通过 由 Katie Zombro
- 已删除
- 已添加
- 不变
步骤行
| [* red] Remove the white label/sticker. |
| [* yellow] Remove the four screws on the left hand side of the back-side of the device. Two of the screws are found behind where the white label was located, two are found directly above the label. You can remove the screws with a small Phillips screwdriver. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加