跳转到主内容

跳到步骤#2

Paul Ringelstein编辑

编辑已通过 由 Paul Ringelstein

已删除
已添加
不变

步骤行

[* black] Using a needle nose pliers, gently pull the connector out of the microphone. In no pliers are available, you can also plugPlug in an XLR to the loose connector, and slowlyconnector.
[* black] Slowly
disconnect it, pulling the connector out with the cable.
[* black] Using a needle nose pliers, gently pull the connector out of the microphone. In no pliers are available, you can also plugPlug in an XLR to the loose connector, and slowlyconnector.
[* black] Slowly
disconnect it, pulling the connector out with the cable.