跳转到主内容

跳到步骤#1

Ron Davis编辑

编辑已通过 由 Ron Davis

已删除
已添加
不变

步骤行

[* black] LocateUsing a small flat head screwdriver, gently turn the retaining screw nearat the bottom of the microphone bodycounterclockwise until it stops or provides resistance.
[* black] Thisicon_note] The retaining screw behaves "backwards"is mounted to what one might expect. Turning it clockwise raises the screw up into the mic body, locking itconnector and has a [https://en.wikipedia.org/wiki/Screw_thread#Handedness|left-handed|new_window=true] thread. Turning the screw clockwise locks the connector in place. LooseningTurning it counterclockwise lowers out ofit down into the hole inhole, releasing the body. Using a small flat head screwdriver, turnconnector.
[* icon_caution] Once
the screw counterclockwise gently. Once it stops, do not continuetry to loosen itit further.
[* black] LocateUsing a small flat head screwdriver, gently turn the retaining screw nearat the bottom of the microphone bodycounterclockwise until it stops or provides resistance.
[* black] Thisicon_note] The retaining screw behaves "backwards"is mounted to what one might expect. Turning it clockwise raises the screw up into the mic body, locking itconnector and has a [https://en.wikipedia.org/wiki/Screw_thread#Handedness|left-handed|new_window=true] thread. Turning the screw clockwise locks the connector in place. LooseningTurning it counterclockwise lowers out ofit down into the hole inhole, releasing the body. Using a small flat head screwdriver, turnconnector.
[* icon_caution] Once
the screw counterclockwise gently. Once it stops, do not continuetry to loosen itit further.