跳转到主内容

跳到步骤#1

malachipclover编辑

编辑已通过 由 Kyle Wiens

已删除
已添加
不变

步骤行

[* black] Locate the screw onnear the sidebottom of the microphone body.
[* black] This screw has a reverse thread that is in the actual connector, so tighteningbehaves "backwards" to what one might expect. Turning it clockwise raises the screw up into the mic. body and holdsmic body, locking it and the connector in place, whilst looseningplace. Loosening it lowers it intoout of the hole in the connectorbody. Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise gently. Once it stops, do not continue to loosen it.
[* black] Locate the screw onnear the sidebottom of the microphone body.
[* black] This screw has a reverse thread that is in the actual connector, so tighteningbehaves "backwards" to what one might expect. Turning it clockwise raises the screw up into the mic. body and holdsmic body, locking it and the connector in place, whilst looseningplace. Loosening it lowers it intoout of the hole in the connectorbody. Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise gently. Once it stops, do not continue to loosen it.