跳转到主内容

跳到步骤#1

chris编辑

编辑已通过 由 Andrew Optimus Goldheart

已删除
已添加
不变

步骤行

[* black] Locate the screw on the side of the microphone body.
[* black] This screw has a reverse thread that is in the actual connector, so tightening it raises the screw up into the mic. body and holds it in place, whilst loosening it lowers it into the connector. Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise gently, untilgently. Once it stops, but do not tightencontinue to loosen it.
[* black] This screw has a reverse thread that is in the actual connector, so tightening it raises the screw up into the mic. body and holds it in place, whilst loosening it lowers it into the connector. Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise gently, untilgently. Once it stops, but do not tightencontinue to loosen it.