跳转到主内容

跳到步骤#1

Paul Ringelstein编辑

编辑已通过 由 Paul Ringelstein

已删除
已添加
不变

步骤行

[* black] Locate the screw on the side of the microphone body.
[* black] Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise until it feels tight.
[* black]
The screw will not come out of the hole, rather slide in deeper inside allowing the connector to slip out of the base of the microphone.
[* black] Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise until it feels tight.
[* black]
The screw will not come out of the hole, rather slide in deeper inside allowing the connector to slip out of the base of the microphone.