跳转到主内容

跳到步骤#1

Paul Ringelstein编辑

编辑已通过 由 Paul Ringelstein

已删除
已添加
不变

步骤行

[* black] Locate the screw on the side of the microphone body.
[* black]
Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise until it feels tight. The screw will not come out of the hole, rather slide in deeper allowing the connector to slip out of the base of the microphone.
[* black] Locate the screw on the side of the microphone body.
[* black]
Using a small flat head screwdriver, turn the screw in the side of the microphone counterclockwise until it feels tight. The screw will not come out of the hole, rather slide in deeper allowing the connector to slip out of the base of the microphone.