跳转到主内容

跳到步骤#13

panheadsnake编辑

编辑被拒绝 由 David Hodson

之前
之后
不变

步骤行

-[* black] Remove the following seven screws securing the logic board to the rear case:
+[* black] Remove the following nine screws securing the logic board to the rear case:
[* red] Three coarse-thread T10 Torx.
[* orange] Three fine-thread T10 Torx.
[* yellow] One long coarse-thread T10 Torx.
+ [* icon_caution] Two long corse thread T10 Torx on each side the memory compartment If not removed it will break the motherboard