跳转到主内容

跳到步骤#7

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* black] Disconnect the following connectors from the logic board:
[* red] Camera/IR board cable.
[* orange] Optical drive fan.
-[* icon_note] When removing these connectors, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
-[* icon_caution] The camera/IR board cable connector is very wide and delicate. Slowly walk the connector out of its socket by pushing either side toward the top of the iMac.
+[* icon_note] When removing the optical drive fan connector, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
+[* icon_caution] To aid in removing the camera/IR board connector, it is helpful to use one hand to pinch the cables against a spudger and pull up toward the top edge of the iMac while pulling up gently on the cables with your other hand.

图片2

没有之前的图片

已添加