跳到步骤#2

Elliot Kane编辑

编辑已通过 由 Elliot Kane

已删除
已添加
不变

步骤行

[* red] Remove the four 3.0 mm Phillips #1 screws attaching the heat sink to the motherboard.
[* orange] Remove the three 4.0 mm Phillips #1 screws connecting the fan to the device.
[* red] Remove the four 3.0 mm Phillips #1 screws attaching the heat sink to the motherboard.
[* orange] Remove the three 4.0 mm Phillips #1 screws connecting the fan to the device.