跳转到主内容

跳到步骤#4

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

已删除
已添加
不变

步骤行

[* black] With the exposed adhesive facing down''down'', carefully align the strips into your iPhone's rear case, withcase.
[* icon_note] Position
the black tab positioned againstvery close to, but not quite touching, the lower components (speaker, headphone jack, and Lightning port)the black plastic speaker housing on the bottom right.
[* black] With the exposed adhesive facing down''down'', carefully align the strips into your iPhone's rear case, withcase.
[* icon_note] Position
the black tab positioned againstvery close to, but not quite touching, the lower components (speaker, headphone jack, and Lightning port)the black plastic speaker housing on the bottom right.
[* black] Set the adhesive strips into the rear case and allow them to stick.