跳转到主内容

Changes to Step #7

Edit by Sam Goldheart

编辑已通过 由 Sam Goldheart

已删除
已添加
不变

步骤行

[* black] Lift the internal frame off the bottom housing, starting at the rear edge, until you feel the concealed edge connector on the motherboard disconnect. Then lift straight off, minding the bluetooth and 802.11 antenna cables.
[* black] Note:Whenicon_note] When reassembling, the wifi antenna wire routes to the inside of the vent and then over the top of the vent.
[* black] Note:Whenicon_note] When reassembling, the wifi antenna wire routes to the inside of the vent and then over the top of the vent.