修复你的物品 社区 商店

跳到步骤＃2

由 Justin Ogihara — 编辑

编辑已通过 由 Justin Ogihara

之前
之后
不变

步骤行

-[* red] Place the plastic spudger in the slot indicated in the picture and, using the flat side of the spudger, use it to pry the back panel upward and off.
-[* black] Do not be afraid to use a bit of muscle, as the panel does not come off without some force
+[* red] Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.
+[* icon_note] Do not be afraid to use a bit of muscle, as the panel does not come off without some force.