跳到步骤＃3
由 Bradyn Braithwaite — 编辑
编辑已通过 由 Bradyn Braithwaite
- 之前
- 之后
- 不变
步骤行
| [* black] Locate the rubber grip on the left side of the camera. Using a metal spudger, pry the rubber grip off of the casing. | |
| [* icon_caution] Be careful not to rip the rubber with the metal spudger. | |
| [* black] Remove the five silver screws underneath the grip. | |
| - | [* red] One 5.83mm silver screw |
| - | [* orange] Four 5.85mm silver screws |
| + | [* red] One 5.83mm J000 silver screw |
| + | [* orange] Four 5.85mm silver J000 screws |