跳到步骤＃3
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [* black] Locate the rubber grip on the left side of the camera. Using a metal spudger, pry the rubber grip off of the casing. | |
| - | [* black] ***CAUTION*** be careful not to rip the rubber with the metal spudger. |
| - | [* black] Remove the five silver screws underneath the grip. |
| - | [* black] • 5.83mm silver x1 DL Flap • 5.85mm silver x4 underflap |
| + | [* icon_caution] Be careful not to rip the rubber with the metal spudger. |
| + | [* red] Remove the five silver screws underneath the grip. |
| + | [* black] One 5.83mm silver DL Flap |
| + | [* black] Four 5.85mm silver under flap |